Thursday, September 15, 2011

How do you change water pump on a 1993 cadillac deville?

Start by washing the front of the motor with Gunk Engine Brite( http://www.gunk.com/ ) and disconnecting the battery. Drain the radiator. Remove four hoses. Unbolt power-steering pump and fasten it off to the side with a piece of wire. Loosen up the alternator, remove one bolt and pull it aside. Remove the belts. Remove the waterpump. Use 6-point sockets because if you strip a bolthead u r ff'd. Scrape the gasket surface on the engine clean with a square razor blade and scrub it shiny with scotch-brite. Slide the two longest bolts into the new pump and test-fit it. Apply gasket cement to both sides of gasket and according to directions for the type u r using and hang it on the bolts. Bolt it up carefull not to touch the gasket to anything. Snug all the bolts first,then tighten. Reassemble the whole thing. Check and adjust the belt tension. Fill it up and check for leaks. Run it and check for leaks. Run it for 15 mins and check for leaks again.

Good luck.How do you change water pump on a 1993 cadillac deville?Hi,



See this source link, and see if this helps...



HAPPY NEW YERA!